Bill, I think you need to use the ETSI 300-019. You don't need to pay for this at http://www.etsi.org.
Sérgio L. Rocha Loures Siemens Ltda. - Brazil Supply Chain - Quality and Engineering IC SC QE L Tel: +55 41 341-5755 Fax: +55 41 341-5058 E-mail: [email protected] -----Mensagem original----- De: Fleury, Bill [mailto:[email protected]] Enviada em: terça-feira, 4 de dezembro de 2001 18:18 Para: [email protected] Assunto: European environmental standard Hi All, My apologies if this is slightly off topic for this list but I thought that, with the wealth of knowledge out there, this would be a good place to start. Has anyone out there had any experience with testing a product for compliance to IEC 60721-3 (Classification of environmental conditions. Part 3: Classification of groups of environmental parameters and their severities)? It has three sections that deal with Storage, Transportation and Stationary use at weather protected locations. My first thought was that possibly it was referenced in GR-63-CORE since it deals with environmental issues but it is not. I am prepared to buy the standard if necessary but I am trying to determine if there is an actual test regime that is specific to this standard or if it would be covered within another standard. Our normal test lab wasn't aware of a test program for this standard; so I thought I'd toss it into this arena. BTW the product here is a PMC module with one ethernet port and falls under the ITE category. Any information will be greatly appreciated. Thanks in advance! Bill Fleury ***************Artesyn Communication Products, LLC****************** ******************************************************************** Bill Fleury Email: [email protected] Compliance Engineer Phone: 608-826-8375 8310 Excelsior Drive Fax: 608-831-8844 Madison, WI 53717 ******************************************************************** ...Be strong, all you people of the land declares the Lord, and work. For I am with you, declares the LORD Almighty. Haggai 2:4 ******************* Visit us at www.artesyn.com/cp ****************** <<Bill Fleury (E-mail).vcf>> ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
