Thanks to all who replied on this question. Ken Javor
---------- >From: [email protected] >To: [email protected], [email protected], [email protected] >Subject: Re: PCB layout question for good EMC performance >Date: Fri, Jun 7, 2002, 6:00 PM > > Hi Ken, > > "Rent's Rule" (spelled as in Howard and Graham's book) with a worked example > is on pages 216-217. > > Good Luck with your problem, > > Thurman J. (Bill) Ritenour > EMC Compliance LLC > 4575 Sioux Drive #303 > Boulder, CO 80303 > 303-543-7404 > [email protected] > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
