As a matter of safety, has anyone really addressed 
the issue of the upper speed limit of CDs? 

Quoted from the following webpage ... 
http://www.qedata.se/e_js_n-cdrom.htm

"Introduction But where's the limit? Manufacturers try to 
outspin each other all the time by selling CD-ROM drives 
with higher and higher spin ratios. Spin ratios of 2x, 4x, 8x, 
16x, 32x, 56x and 64x come in a never ending stream. The 
CD is forced to rotate faster and faster. At what speed will 
a CD blow up, and can you do something to prevent it from 
exploding? ..." 

At the conclusion of the test, the author recommends the 
following ... 

"Safety Recommendations The committee wishes, after finishing 
its work, to suggest the following safety precautions.

Safe distance to a CD-ROM drive with spin ratio 64x CLV 
should be no less than 5 metres (15 ft.). 

All work with CD-ROM units should require safety goggles and 
protective clothing be worn. 

CD-ROM drives of the 64x CLV class and higher, should be 
provided with shrapnel protection of no less than 3 mm aluminium 
or 1 mm steel. 

To avoid operator inhalation of CD-ROM particles, CD-ROM 
drives should be provided with a dust suction fan with suitable 
filter, or have the fan duct connected directly to the outside air. 
In addition to the laser light warning label, CD drives should be 
affixed with another label warning against the hazard of shrapnel, 
such as the one below: " 

With appropriate labels for exploding CDs. 
No. This isn't a joke. 

Regards, Doug McKean 



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to