The important words are "USED WITH ITE" the product must therefore be reviewed to the appropriate '950 standard for it intended use. That is contains a 9V battery is irrelevant - that battery requires replacement and warning in the appropriate language and in accordance with the local disposal requirements.
AND - as you go through EACH clause you will find other areas _back feeds from the output connections - what happens when SELV connections to the box hit the allowance surge limits? What if your ccts draw power from the ITE unit - will it create a fault in the external equipment or a fire in the box????? Sorry Richard - you cannot just write it of as not applicable. Best regards Gregg PLEASE NOTE: We are currently experiencing serious problems with our service provider PLEASE reply only to [email protected] <mailto:[email protected]> and ignore any reference to pgtv.net, Thank you. ------Original Message----- -From: [email protected] -[mailto:[email protected]]On Behalf Of [email protected] -Sent: Thursday, April 25, 2002 1:28 PM -To: [email protected] -Subject: General Product Safety Directive - - - -Let's take an example of a non-rechargable 9V battery operated -ITE product -intended soley for business use; and due to its nature, it is highly -unlikely to be used by laymen outside that business -environment (i.e., not -in the home). That product is not subject to the LVD, but it might be -subject to the GPSD depending upon scope of the term -"consumer". The GPSD -uses the word "consumer" without defining the term. What is the legal -meaning and scope of that term in the EU? Comments? - -Richard Woods -Sensormatic Electronics -Tyco International - - -------------------------------------------- -This message is from the IEEE EMC Society Product Safety -Technical Committee emc-pstc discussion list. - -Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ - -To cancel your subscription, send mail to: - [email protected] -with the single line: - unsubscribe emc-pstc - -For help, send mail to the list administrators: - Ron Pickard: [email protected] - Dave Heald: [email protected] - -For policy questions, send mail to: - Richard Nute: [email protected] - Jim Bacher: [email protected] - -All emc-pstc postings are archived and searchable on the web at: - http://ieeepstc.mindcruiser.com/ - Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
