Hi Barbara,

Yes, I believe what we have is an official translation of CNS13438. I'm sure it has the usual disclaimers on it warning that in the event of a conflict between the original and the translation, the original Chinese prevails, though.

Thanks for your post detailing the MRAs. I think it helps make some sense out of it for those who aren't following it regularly.

About the "in-country testing required" note on our web site, that's actually intended to refer to telecom testing. BSMI has recognized EMC test reports from designated labs even before the APEC TEL MRA, and DGT adopted this practice when they began evaluating EMC compliance on telecom equipment two years ago. On the telecom front, Taiwan has been ready for some time to move forward with the US on Phase I and more recently Phase II of the MRA. It's just a matter of designating labs outside of Taiwan. As far as I know, the only lab designated for any standard besides EMC is CCS. For wire line telecom, until there are labs designated outside of Taiwan to test to the standard that applies to a product, the practical advice is that it's got to be tested (for telecom) in-country.

Sorry to cause confusion.

-Fred Borda
Compliance International
www.typeapproval.com



At PM 12:50 04/22/02 -0700, Barbara Judge wrote:

Hi Fred,

Is that an official translation of CNS 13438?  By the way in visiting your
website I notice that you stipulate that "In-country testing is required for
most equipment"  Under the APEC Mutual Recognition Arrangement, both Taiwan
and the US being signatories, it is not required that testing be conducted
in Taiwan.  Testing may be conducted by a Conformity Assessment Body (CAB),
in the U.S., that has been Nominated by NIST and confirmed by DGT.  We are
still in Phase 1 of the Arrangement so submission to DGT is still required.
Once we move to Phase 2 the confirmed CABs under Phase 2 should be capable
of certifying products for DGT.  I'd be happy to discuss our capability with
you off-line.

Best Regards,
Barbara
_______________________________________
Barbara L. Judge
Vice President
Compliance Certification Services
Designated TCB and CAB
561F Monterey Road
Morgan Hill, CA 95037
408-463-0885 ext.104
Fax:  408-463-0888
e-mail:  [email protected]
http://www.ccsemc.com


-----Original Message-----
From: Fred Borda [mailto:[email protected]]
Sent: Monday, April 22, 2002 11:22 AM
To: [email protected]
Cc: [email protected]
Subject: Re: CNS Standards



Hello Bob,

Compliance International can provide the CNS 13438 standard for you. Please
contact me off-list for details.

Best regards,

-Fred Borda
Compliance International
www.typeapproval.com



At PM 12:05 04/22/02 -0500, [email protected] wrote:

>Can anyone provide a source to purchase Taiwan EMC standards (CNS) in
>English?
>
>Thank you,
>Bob Heller
>3M Product Safety, 76-1-01
>St. Paul, MN 55107-1208
>Tel:  651- 778-6336
>Fax:  651-778-6252
>
>
>-------------------------------------------
>This message is from the IEEE EMC Society Product Safety
>Technical Committee emc-pstc discussion list.
>
>Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
>To cancel your subscription, send mail to:
>      [email protected]
>with the single line:
>      unsubscribe emc-pstc
>
>For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
>
>For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
>All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"

----
Fred Borda
Director
Marketing & Business Development
Compliance International
www.typeapproval.com
--------------------------------------------------
The experts in telecommunications equipment type approval
across the Asia-Pacific region
--------------------------------------------------
4713 First Street, Suite 280
Pleasanton, California 94566-7362 USA
Tel  +1.925.417.5571 (direct)
Fax  +1.925.417.5574
Mobile  +1.650.740.5762
[email protected]



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

----
Fred Borda
Director
Marketing & Business Development
Compliance International
www.typeapproval.com
--------------------------------------------------
The experts in telecommunications equipment type approval
across the Asia-Pacific region
--------------------------------------------------
4713 First Street, Suite 280
Pleasanton, California 94566-7362 USA
Tel  +1.925.417.5571 (direct)
Fax  +1.925.417.5574
Mobile  +1.650.740.5762
[email protected]



-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
    [email protected]
with the single line:
    unsubscribe emc-pstc

For help, send mail to the list administrators:
    Ron Pickard:              [email protected]
    Dave Heald:               [email protected]

For policy questions, send mail to:
    Richard Nute:           [email protected]
    Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
   http://ieeepstc.mindcruiser.com/
   Click on "browse" and then "emc-pstc mailing list"

Reply via email to