Slight adjustments
Part I http://www.pcdmag.com/mag/archives/OEG20010928S0122.html
Part II http://www.pcdmag.com/online/redux_0701_esd.html
- Robert -
Robert A. Macy, PE [email protected]
408 286 3985 fx 408 297 9121
AJM International Electronics Consultants
619 North First St, San Jose, CA 95112
-----Original Message-----
From: John Barnes <[email protected]>
To: Richard Jones <[email protected]>; [email protected]
<[email protected]>
List-Post: [email protected]
Date: Tuesday, April 23, 2002 7:10 AM
Subject: Re: ESD
>
>Richard,
>I invite you to read my article "Designing Electronic Equipment for ESD
>Immunity". Part I was published in the July 2001 Printed Circuit Design
>magazine (vol. 18 no. 7, pp. 18-26). Part II was published on the
>magazine's web site in November 2001. You can download the entire
>article from the Internet:
>* Part I-- http://www.pcdmag.com/story/OEG20010928S0122
>* Part II-- http://www.pcdmag.com/redux/0701_esd.html
>
>I also have a (partially-) annotated bibliography for the article at
> http://www.r-e-d-inc.com/esd-anno.htm
>which covers close to 1400 source documents on the subject.
>
>Enjoy!
> John Barnes
> Consultant, Robust Electronic Design, Inc.
> President, dBi Corporation
>
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
