Richard, I invite you to read my article "Designing Electronic Equipment for ESD Immunity". Part I was published in the July 2001 Printed Circuit Design magazine (vol. 18 no. 7, pp. 18-26). Part II was published on the magazine's web site in November 2001. You can download the entire article from the Internet: * Part I-- http://www.pcdmag.com/story/OEG20010928S0122 * Part II-- http://www.pcdmag.com/redux/0701_esd.html
I also have a (partially-) annotated bibliography for the article at http://www.r-e-d-inc.com/esd-anno.htm which covers close to 1400 source documents on the subject. Enjoy! John Barnes Consultant, Robust Electronic Design, Inc. President, dBi Corporation ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
