Group, We have a client in Orange County, California that needs a consultant for a product intended to be used in a Class 1 Div 1 location. They would prefer someone to work with them on a one-to-one basis and time is of the essence.
If anyone with the proper credentials in UL 1203 or FM 3610 would like to contract to assist them, please contact me off line and I will put you in contact with them. Sincerely, Robert R. Loop Engineering Supervisor - Product Safety ph: (256) 837-4411 x313 fax:(256) 721-0144 email: [email protected] This email transmission is confidential and intended for the addressee only. It may contain privileged and confidential information. If you are not the person or organization to whom it is addressed, you must not copy, distribute, or take any action in reliance upon it. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
