I read in !emc-pstc that [email protected] wrote (in <[email protected]>) about 'Input voltage range - EN61000-4, 5 and 6', on Thu, 18 Apr 2002: >In the very specific case of Medical devices, the newest edition of IEC >60601-1-2 specifies -5 testing at the extreme ends the range of >continuously adaptive supply and in each range of a switched range supply.
That should be reserved for safety testing, for which it is justified. I think it's gilding the lily for EMC. We are measuring with great precision, using exhaustive (and exhausting!) test protocols, quantities that bear only a very approximate relation to the actual EMC performance in any given real-life condition. Thus, these costly measurements have to be accompanied by a disclaimer that they do not guarantee freedom from unacceptable interference and further measures may be required in some cases. AFAIK, apart from the 60601 case, for EMC testing the rated supply voltage (or one of them) is applied. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
