Andy At least my eyes do not appear to have been deceiving me!
See also John Wood's response (thanks JW) sugguesting that I (we?) contact IEC TC66 Chairman: Mr. Cecil CHAPMAN Grant Instruments (Cambridge) Ltd. Mill Barn GB - BASSINGBOURN, CAMBRIDGESHIRE SG8 5PP UNITED KINGDOM Tel: +44 1763 247 666 Fax: +44 1763 249 666 +44(1763)260811 (Office Secretary) E-mail: [email protected] Maybe we should wait a day or two to see if anyone else has comments or other confirmations, and then I will forward my original email to the above gentleman - together with anything else that comes up. Sound reasonable? John Allen ----- Original Message ----- From: "Andrew Wood" <[email protected]> To: "'John Allen'" <[email protected]> Cc: "'emc-pstc'" <[email protected]> Sent: Tuesday, April 16, 2002 9:36 AM Subject: RE: IEC/EN 61010-1:2001 - Dielectric Strength Testing Question ( & another) > > > > > -----Original Message----- > > From: John Allen [SMTP:[email protected]] > > Sent: 15 April 2002 20:44 > > To: EMC-PSTC > > Subject: Re: IEC/EN 61010-1:2001 - Dielectric Strength Testing Question ( & another) > > > > Hi Folks > > > > My turn to ask some questions as a newcomer to this version of the standard: > > > > > I was pondering the 1.4mm only yesterday. > I can also confirm the missing arrows etc. > > I would appreciate other opinions on a point before I add it to my own list: > In 9.3 b) 2) shouldn't the reference be to Table 14 rather than Table 13? > > Do you think there is any merit in compiling a common list? > > Best regards > Andy Wood > Land Instruments > England. > > > > > > > > This e-mail and its contents may be confidential, privileged and protected > by law. Access is only authorised by the intended recipient. The contents > of this e-mail may not be disclosed to, or used by, anyone other than the > intended recipient, or stored or copied in any medium. If you are not the > intended recipient, please advise the sender immediately. > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
