> -----Original Message-----
> From: John Allen [SMTP:[email protected]]
> Sent: 15 April 2002 20:44
> To: EMC-PSTC
> Subject: Re: IEC/EN 61010-1:2001 - Dielectric Strength Testing Question
> ( & another)
>
> Hi Folks
>
> My turn to ask some questions as a newcomer to this version of the standard:
>
>
I was pondering the 1.4mm only yesterday.
I can also confirm the missing arrows etc.
I would appreciate other opinions on a point before I add it to my own
list:
In 9.3 b) 2) shouldn't the reference be to Table 14 rather than Table
13?
Do you think there is any merit in compiling a common list?
Best regards
Andy Wood
Land Instruments
England.
>
>
>
This e-mail and its contents may be confidential, privileged and protected
by law. Access is only authorised by the intended recipient. The contents
of this e-mail may not be disclosed to, or used by, anyone other than the
intended recipient, or stored or copied in any medium. If you are not the
intended recipient, please advise the sender immediately.
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
