If you want an NB to accept your test data, at least one agency engineer has recommended this model:
http://www.therm-x.com/Product.asp?Param1=258B&Param2=5 If you do not have 1300+ USD in your budget, a simple cap-discharge welder is easy to build, but requires that you do the "uncertainty dance", to comply w/ISO 17025. Brian -----Original Message----- From: Brian McAuliffe [mailto:[email protected]] Sent: Tuesday, September 17, 2002 8:14 AM To: Emc-Pstc Post Subject: thermocouple welder any recommendations for a fine-wire thermocouple tip welder ? Brian -------------------------------------------- Brian McAuliffe MCA Compliance Solutions Ltd Unit 2 Lissane Business Park|Clarecastle|Co.Clare|Ireland w: www.mcac.ie e: [email protected] t: +353 (0)65 6823452 m: +353 (0)87 2352554 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
