Yes. Get a good beefy DC power supply. Attach both leads of the thermocouple to one of the outputs PLUS or MINUS. Doesn't matter.
Twist together the leads to be welded. Get a piece of lead that's used in drafters pencils. Attach this piece of lead to the other output of the power supply. Turn on the power supply. LIGHTLY and QUICKLY touch the twisted leads of the thermocouple to the lead a few times. Welding will commence. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"