Hello Oscar,

FYI The 6th ed of IEC60065 does not include battery powered product in the
scope but the recently published 7th 2001 ed does now include battery
powered product.......I would stick with the 6th edition as the 7th has not
been adopted by many countries yet.....I agree with Sam in that if your
product connects to a mains connected battery charger then IEC60065 would
definitely apply.... Even if the product does not use a charger and if there
are no specific standards for battery powered digital cameras (don't believe
there are) you can still use IEC60065 6th ed as it is not excluded in the
scope.


I would still want to verify safety compliance of my product if I were you.
As far as I remember if your product is less than 75Vdc, as outlined in
Article 1, your product should not have to legally comply with the LVD in
any case and you should be able to legally mark your product based solely on
compliance with the EMC Directive.....................I'd be interested in
any information anyone has to the contrary on this subject.................

regards,

John

-----Original Message-----
From: Sam Davis [mailto:[email protected]]
Sent: Thursday, August 08, 2002 2:29 PM
To: [email protected]
Cc: Emc-Pstc
Subject: RE: Are There Any Standards that Apply to Digital Cameras



UL 6500 - Audio/Video and Musical Apparatus for Household, Commercial, and
Similar Use.

IEC 60065 - Audio, Video, and Similar electronic Apparatus - Safety
Requirements.
The UL Standard is based on this, with of course, deviations.  I don't have
a copy of it at my desk, so I cannot verify that battery-operated audio and
video products are listed in the scope, as they are in the UL Standard.

If the IEC Standard does not specify battery-operated, but still has the
line "designed to be fed from the mains or from a SUPLY APPARATUS", supply
apparatus being defined as "apparatus which takes power from the mains and
from which one or more other apparatus are fed", then the camera, if it has
a power supply adapter, would fall into the scope.

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of
[email protected]
Sent: Thursday, August 08, 2002 7:17 AM
To: [email protected]
Subject: Are There Any Standards that Apply to Digital Cameras





Everyone,

Does anyone know of any product safety standards that apply to digital
cameras?
The simple, personal, "AA" battery powered type of digital cameras.

Thank you.

Oscar Overton
Ph: 859-232-2284





-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to