It is not a double pole fuse and that is not a requirement. Regards, Mark -----Original Message----- From: Crabb, John [mailto:[email protected]] Sent: Monday, July 22, 2002 11:04 AM To: [email protected] Subject: RE: IEC60320
I have never heard of an inlet with provision for a spare fuse. Are you sure it wasn't a double pole fused inlet ? (SOME PEOPLE say double pole fusing is a requirement of IEC 60950, "but it ain't necessarily so"). ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
