Hi Group,
EN 61000-6-2 calls for severity level 3, or 10Vrms for conducted
disturbances. This equates to 37dBm which is 7dB higher than the upper
limit my receiver will handle (during calibration of the CDN). I've
tried to use an attenuator and compensate for it in my readings, but
this creates a high VSWR. Any ideas how to extend the dynamic range of
my receiver without causing high VSWR?
Kind Regards,
Sam Wismer
Engineering Manager
ACS, Inc.
Phone: (770) 831-8048
Fax: (770) 831-8598
Web: www.acstestlab.com
