You can download ETSI standards for free at www.etsi.org . You have only to register with your email address.
Best Regards Lothar Schmidt Technical Manager EMC/Radio BQB CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 * +1 408 586 6214 * +1 408 586 6299 -----Original Message----- From: Stuart Lopata [mailto:[email protected]] Sent: Thursday, January 31, 2002 6:10 AM To: emc Subject: EN 300 390 [2], clause 9.1 There is a bit error rate test for EN 300 113 that references -- EN 300 390 [2], clause 9.1 -- for method of measurement. Could someone please quote me with that part since I do not need the entire document. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
