Stuart,
EN 300390-2 is freely downloadable (in PDF) from ETSI's website at: http://www.etsi.org/getastandard/home.htm I hope this helps. Best regards, Ron Pickard [email protected] [email protected] Sent by: To: [email protected] owner-emc-pstc@majordom cc: o.ieee.org Subject: EN 300 390 [2], clause 9.1 01/31/02 07:10 AM Please respond to stuart There is a bit error rate test for EN 300 113 that references -- EN 300 390 [2], clause 9.1 -- for method of measurement. Could someone please quote me with that part since I do not need the entire document. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
