I read in !emc-pstc that [email protected] wrote (in <16b.79458de.298 [email protected]>) about 'EN 61000-3-3 compliant heater controller', on Wed, 23 Jan 2002: > They seem to me to be an excellent idea, and can help avoid the need for > improving a legacy mains distribution or buying EN 61000-3-2 compliant > equipment.
NO! Because the EMCD operates exclusively at product level, the use of external mitigation does not permit conformity. The present IEC/EN61000-3-2 requires products to conform in a stand-alone configuration, with no external aids. This is one of the major points of contention at present in the discussions leading to the Second Edition of IEC/EN61000-3-2. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk After swimming across the Hellespont, I felt like a Hero. PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
