Mike / all. You seem to have forgotten Amplifier Research has competing equipment to the one that you work for. Frank ----- Original Message ----- From: "Mike Hopkins" <[email protected]> To: "'Bill Flanigan'" <[email protected]>; <[email protected]> Sent: Wednesday, October 30, 2002 12:34 PM Subject: RE: EN61326:1997 Planning
> > These days, there are a number of "combination" testers on the market that > will perform tests to both IEC 61000-4-5 and 61000-4-11. Thermo KeyTek has > one for just under $10k that also does EFT and Mag fields for the same > price.... Other manufacturers have similar units - prices depend on things > like voltage (testing to as high as 6kV for surge), how the dip & interrupt > tests are done (external variac's and switches vs. internal tap switched > transformers), software control, etc... > > I'll leave the CISPR 11 questions to someone more qualified than I am..... > > Mike Hopkins > > -----Original Message----- > From: Bill Flanigan [mailto:[email protected]] > Sent: Wednesday, October 30, 2002 10:27 AM > To: [email protected] > Subject: EN61326:1997 Planning > > > > A few questions about compliance to EN 61326. Guidance requested from my > emc-pstc colleagues > > What happened in Amendment 2; I have the standard to +A1 > > Immunity: > EN 61000-4-5 [Imm'y Surge] what kind of equipment is needed to > conduct this test? > EN 61000-4-11[Imm'y Voltage dips] what kind of equipment is needed > to conduct this test? > > Emissions: > We manufacture equipment classified under EN55011 as ClassA Group2; > we generate RF energy for industrial purposes, excluding communications. > Section 7.2 says 'For equipment using ISM frequencies, see CISPR11.' > *Does this mean _use_ EN55011:91 for emissions limits as I have been > doing? EN 61326-1 doesn't mention anything about Group2 limits. > *Is there now a distinction between ISM equipment and equipment > using ISM frequencies? Not trying to split hairs here, but if it doesn't > actually use ISM frequencies my equipment is calssified as ISM equipment, > right? > > Wm Flanigan > Standards Engineer > Ameritherm Inc > 1.800.456.4328 > [email protected] > > > > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
