A few questions about compliance to EN 61326. Guidance requested from my
emc-pstc colleagues
What happened in Amendment 2; I have the standard to +A1
Immunity:
EN 61000-4-5 [Imm'y Surge] what kind of equipment is needed to
conduct this test?
EN 61000-4-11[Imm'y Voltage dips] what kind of equipment is needed
to conduct this test?
Emissions:
We manufacture equipment classified under EN55011 as ClassA Group2;
we generate RF energy for industrial purposes, excluding communications.
Section 7.2 says 'For equipment using ISM frequencies, see CISPR11.'
*Does this mean _use_ EN55011:91 for emissions limits as I have been
doing? EN 61326-1 doesn't mention anything about Group2 limits.
*Is there now a distinction between ISM equipment and equipment
using ISM frequencies? Not trying to split hairs here, but if it doesn't
actually use ISM frequencies my equipment is calssified as ISM equipment,
right?
Wm Flanigan
Standards Engineer
Ameritherm Inc
1.800.456.4328
[email protected]
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
