I read in !emc-pstc that Peter L. Tarver <[email protected]> wrote (in <[email protected]>) about 'Creepage' on Mon, 7 Oct 2002: >IEC 60664-1, -2, -3 are the reference standards used to >establish creepage and clearance distances. Individual >standards committees do with them what they will, so that >will explain the differences.
Partly due to the time lag involved in updating standards. Product committees are not supposed to deviate from IEC 60664 without a very good reason. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
