Richard IEC 60664-1, -2, -3 are the reference standards used to establish creepage and clearance distances. Individual standards committees do with them what they will, so that will explain the differences.
Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] > -----Original Message----- > From: [email protected] > Sent: Monday, October 07, 2002 11:46 AM > > What is a good source that explains the rational > for the values for creepage > distances? > > Richard Woods > Sensormatic Electronics > Tyco International > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
