I just purchased a ESD Gun called Minizap from Keytek Instruments in Lowell, MA. Phone number is 800 7Keytek. Contact is Doug Default. They sell new and sometimes you can get a refurbished with the full warranty and calibration.
Bryan Cole Director of Engineering Product Safety Officer Emerson Network Power - Control Concepts Binghamton, New York 13902 Phone: 607.724.1352 extension 238 Fax: 607.724.0153 E-mail: [email protected] www.Liebert.com www.Control-Concepts.com www.Edcosurge.com -----Original Message----- From: Joe Finlayson [mailto:[email protected]] Sent: Friday, October 04, 2002 2:29 PM To: 'EMC PSTC' Subject: ESD Gun I'm currently renting a Schaffner NSG435 ESD Gun and like the features. Would anyone be able to provide me with some leads where I might be able to get a deal (used is OK) on a comparable piece of equipment to purchase? I find the "continuous" feature to be a necessity as well as the ability to set the pulse frequency to 0.5 Hz (2 pps) or less. Any leads would be appreciated. Any solicitation is encouraged to be done off line. Thx, Joe ******************************************* Joe Finlayson Manager, Compliance Engineering Telica, Inc. 734 Forest Street, Bldg. G, Suite 100 Marlboro, MA 01752 Tel: (508) 804-8212 Fax: (508) 480-0922 Email: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
