I agree with Mr. Pettit and I would further state that I do not consider baseband video to be an antenna-transmittable rf signal. The spectrum required for video is too broad to be transmitted until it is up-converted.
---------- >From: "Pettit, Ghery" <ghery.pet...@intel.com> >To: "'Gary McInturff'" <gary.mcintu...@worldwidepackets.com>, "EMC-PSTC (E-mail)" <emc-p...@ieee.org> >Subject: RE: Intentional Radiator or not? >Date: Mon, Sep 30, 2002, 11:21 AM > > > Gary, > > Is it necessary for this device to radiate a signal in order to function? >>From your description, I think not. Therefore, I would think that this is > not an intentional radiator. But then, I'm not an FCC official, nor do I > play one on TV... > > Ghery Pettit > > > -----Original Message----- > From: Gary McInturff [mailto:gary.mcintu...@worldwidepackets.com] > Sent: Friday, September 27, 2002 8:36 AM > To: EMC-PSTC (E-mail) > Subject: Intentional Radiator or not? > > > > I have a black box device that takes in an RF video feed via a coax > cable and then translates that to light energy for transmission. Its > bi-direction, meaning that, I can also pump light into it and get the RF > signal back for distribution down the coax cable. > My opinion, for the moment is that it is not an intentional > radiator, simple a cable connected device that happens to have RF signals > present to perform is function of data transmission. > Any disagreements, and why? > Thanks for your thoughts > Gary > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@attbi.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: davehe...@attbi.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > http://ieeepstc.mindcruiser.com/ > Click on "browse" and then "emc-pstc mailing list" > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
