Hi all, Assume you are going to power three units from a power distribution box.
You might have two scenarios: 1. Route one cable to the first unit, from that unit you route a new power cable to the next unit, and so on (serial connections) 2. Three separate power cables, one cable to each unit (parallel). WhatÂ’s best practice for EMC ?? I assume you have to make a lot of assumptions regarding the cable layout and the installation. But are there any basic rules for such cable distribution that we should be aware of regarding Radiated emission ? Best regards Amund Westin, Oslo, NORWAY ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"