The proposed WEEE Directive bans certain flame retardants.

http://europa.eu.int/comm/enterprise/environment/index_home/waste_management
/waste_management.htm#WEEE Directive

You will have to paste that link back together if it line wrapped.

Richard Woods
Sensormatic Electronics
Tyco International


-----Original Message-----
From: Kyle Ehler [mailto:[email protected]]
Sent: Saturday, August 24, 2002 11:12 PM
To: David Heald; [email protected]
Subject: Re: Halogen free cables for the EU



I suspect this is more of a recycling issue.
When wiring is incinerated rather than recycled at end of life, it releases
all sorts of ugly substances into the atmosphere.  I seem to recall reading
this as part of either a German or Swedish (Danish?) proposal.  I am sorry,
it has been too long since I worked this issue and I cannot at this moment
recall the organization's name... Blue Angel (Blau something? German)
Swedish...no solid memory of the name, but it was a website for the
organization.

kyle
(unemployed but hopeful to change this)

----- Original Message -----
From: "David Heald" <[email protected]>
To: <[email protected]>
Sent: Friday, August 23, 2002 4:01 PM
Subject: Halogen free cables for the EU


>
> Does anyone know where the halogen restrictions for wire insulation in the
> EU come from?  I remember dealing with this issue sometime in the last few
> years, but now I can't remember where the actual requirement came from.
> Also, does anyone know if the Halogen restrictions only apply to, say,
power
> wiring - with low voltage intrasystem wiring exempt?
>
> Thanks,
> Dave Heald
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
>      [email protected]
> with the single line:
>      unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
>      Ron Pickard:              [email protected]
>      Dave Heald:               [email protected]
>
> For policy questions, send mail to:
>      Richard Nute:           [email protected]
>      Jim Bacher:             [email protected]
>
> All emc-pstc postings are archived and searchable on the web at:
>     http://ieeepstc.mindcruiser.com/
>     Click on "browse" and then "emc-pstc mailing list"


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     [email protected]
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              [email protected]
     Dave Heald:               [email protected]

For policy questions, send mail to:
     Richard Nute:           [email protected]
     Jim Bacher:             [email protected]

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to