Lisa,
Com Power sells complete pre-compliance system with an inexpensive spectrum
analyzer, pre-amplifier, and a set of  three probes.

Regards, Ravinder
PCB Development and Design Department
IBM Corporation
Email: ajm...@us.ibm.com
***************************************************************************
Always do right.  This will gratify some people and astonish the rest.
.... Mark Twain



                                                                                
                             
                      lisa_cef...@mksinst.co                                    
                             
                      m                             To:       
emc-p...@majordomo.ieee.org                    
                      Sent by:                      cc:                         
                             
                      owner-emc-pstc@majordo        Subject:  Emissions "quick 
test"                         
                      mo.ieee.org                                               
                             
                                                                                
                             
                                                                                
                             
                      08/20/2002 01:34 PM                                       
                             
                      Please respond to                                         
                             
                      Lisa_Cefalo                                               
                             
                                                                                
                             
                                                                                
                             




Hi all,

Does anyone know of a " down- and- dirty" , inexpensive method or equipment
for sniffing out emissions issues?  I've used a Spectrum Analyzer in the
past with a series of different probes, but that tends to be costly.  Also,
Is there a "universal" probe kit out there?

Thank you in advance.

Lisa

Lisa A. Cefalo, CRE
Manager, Reliability and Design Services
MKS Instruments
6 Shattuck Road
Andover, MA 01810
(978)-975-2350  X 5669
lisa_cef...@mksinst.com


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"






-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@attbi.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to