Hi - and just when I thought I had it all figured out.. I have a question on the FCC requirement to test a product to the highest frequency used.
Say a company has an RF receiver that has a DSP processor in it running at 50MHz. Lets also say that said receiver is pointed at a transmitter that has a 12Ghz signal. Should I test the receiver to a) 5X the 50MHz or b) 5x the 12GHz transmitter signal? We have an FCC interpretation - bet you can't guess what it is.. Charles Grasso Senior Compliance Engineer Echostar Technologies Corporation phone: 303.706.5467 FAX: 303.799.6222 Charles Grasso Senior Compliance Engineer Echostar Technologies Corporation phone: 303.706.5467 FAX: 303.799.6222 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"