Hi Scott:
> In the case of LPS, wouldn't the plastic enclosure still be considered
> "decorative"
> plastic "outside" a fire enclosure and required to meet HB flame class (per
> UL
> 60950, 4.7.3.3)?
Yes.
Virtually all plastic materials meet the HB flame class,
hence my comment that he "may use any plastic."
Best regards,
Rich
> Rich Nute wrote:
>
> > The choice is yours. If your product is supplied by a
> > Limited Power Source, then you may use any plastic for the
> > enclosure. If your product is not supplied by a Limited
> > Power Source, then you must use V1 or better plastic for
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
