Mike, we use Excel and include the following data: Model Description Serial number Manufacturer Last cal date Due cal date Calibration lab Cal cost
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Mike Stone [mailto:[email protected]] Sent: Monday, April 15, 2002 8:22 AM To: EMC-PSTC (E-mail) Subject: Calibration Tracking Software Good Morning, I have been looking for a reasonably priced (cheap) software program to track and produce status reports for our calibrated equipment. Does anyone have any suggestions? Thank you in advance. Regards, Michael Stone L. S. Compliance Inc. W66 N220 Commerce Court Cedarburg, WI 53012 262-375-4400 Ext. 128 [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
