So, what about an isolation transformer? Cortland
>>Sam Wismer wrote however that would seem to go against the intent of the test so I decided to consult the mfg of the AC source to see what it would take to modify the unit to true single phase Euro power. The expensive option is to retro-fit the unit with a new module(seems as if I am always in need of a new module of some sort). The cheap option would be to set up the device for a 3 conductor split phase 230Vac hot + Neutral + earth arrangement. This too seems unacceptable for this emissions test and most immunity tests, since most immunity tests require the AC mains of << ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
