Take a look at GR-78. Regards,
Bandele Adepoju Jetstream Communications [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, March 21, 2002 7:44 AM To: [email protected] Subject: What standards reference the insertion force for a PCB into a card cage? Folks Are there any specifications in any EU Directive, or other standards governing how much manual force is required to insert a PCB into a card cage? If not, are there any specifications from any standard that determines how much horizontal force an operator can be expected to exert? This operation is expected to be infrequent. Please contact me if questions. Thanks for your assistance. Best Regards, Paul J Smith Teradyne, Inc., 179 Lincoln Street, MS-L22-19 Boston, MA 02111 [email protected] Voice 617-422-2997; cell 617-549-1308 Fax 603-843-7526 ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
