Arno,

Our Installation Instructions for Fire/Burglary Alarm Control Panels specify
permanent wiring to the mains for security reasons.  However, a double-pole
circuit breaker on the branch circuit supplying the control panel is
recommended to satisfy the LVD.

In the US-Canada we have optional radio- and cellular links so the panel
with aux. battery reports faults even if mains and telephone are severed by
intruders.

To temporarily disable the system it is best to enter the proper commands on
a keypad console.

David

-----Original Message-----
From: Arno van Kesteren [mailto:avkes...@eso.org]
Sent: Monday, March 18, 2002 4:44 PM
To: emc-p...@majordomo.ieee.org
Cc: Arno van Kesteren
Subject: Temporarily disabling a fire fighting system



Dear All,

Although maybe a bit out of the scope of this group I still hope that this
issue may be dealt with.

I would like to know whether "the standards" allow the installation of a
switch in a fire detection & fighting system to be able to temporarily
disable its operation.

If not, what would be the procedure to build in such functionality ?

Arno van Kesteren
ESO
Munich, Germany
e-mail: avkes...@eso.org


-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               davehe...@mediaone.net

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

All emc-pstc postings are archived and searchable on the web at:
    http://ieeepstc.mindcruiser.com/
    Click on "browse" and then "emc-pstc mailing list"

Reply via email to