Dear Barbara, Thank you for the correction. I wasn't really thinking about the TCB option since I was pretty sure Pierre was supposed to be using the DoC procedures based on his original message. I am still curious about what his product is...
Best regards, Paul -----Original Message----- From: Barbara Judge [mailto:[email protected]] Sent: Monday, July 01, 2002 7:18 PM To: 'JP Hare'; Pierre SELVA; Forum Safety-emc Subject: RE: FCC Authorization (Form 731) for ITE class B ; Do I need a TCB ? Paul, Forgive me, but you are incorrect in your description of the services that TCBs perform. TCBs may be authorized by the FCCto provide certification services under any one or all of 9 categories. Those categories are: A. Unlicensed Radio Frequency Devices 1. Low power transmitters operating on frequencies below 1 GHz (with the exception of spread spectrum devices), emergency alert systems, unintentional radiators (e.g., personal computers and associated peripherals and TV Interface Devices) and consumer ISM devices subject to certification (e.g., microwave ovens, RF lighting and other consumer ISM devices) 2. Low power transmitters operating on frequencies above 1 GHz, with the exception of spread spectrum devices 3. Unlicensed Personal Communication System (PCS) devices 4. Unlicensed National Information Infrastructure (UNII) devices and low power transmitters using spread spectrum techniques B. Licensed Radio Service Equipment 1. Personal Mobile Radio Services in 47 CFR Parts 22 (cellular), 24, 25, 26, and 27 2. General Mobile Radio Services in the following 47 CFR Parts 22 (non-cellular), 74, 90, 95 and 97 3. Maritime and Aviation Radio Services in 47 CFR Parts 80 and 87 4. Microwave Radio Services in 47 CFR Parts 21, 74 and 101 C. Telephone Terminal Equipment (47 CFR Part 68) 1. Telephone terminal equipment in 47 CFR Part 68 As you can see, only one of the 9 categories deals with Pt. 68 issues. Additionally, it is no longer even possible to obtain a Grant for ITE from the FCC. They may only be granted via TCBs. I hope that this clarifies the issue for you. Should you have any questions relative to TCBs I'd be happy to address them for you. Best Regards, Barbara L. Judge Chair, TCB Council -----Original Message----- From: JP Hare [mailto:[email protected]] Sent: Monday, July 01, 2002 3:45 PM To: Pierre SELVA; Forum Safety-emc Subject: RE: FCC Authorization (Form 731) for ITE class B ; Do I need a TCB ? Dear Selva, Can you tell us a little more about your product? You mention that it is ITE class B. Does it have a transmitter section? If not, then you should be aware that class B IT equipment falls under the Declaration of Conformity rules (See 47 CFR 15.19, I think...) There is no need to contact the FCC in this case. But if you are sure you need to "certify" the device with the FCC, then you wouldn't necessarily go TCB route. Telecom Certifications Bodies are just that: bodies that certify telecommunications devices under Part 68 rules, not Part 15. Granted, many TCBs are familiar with the FCC's authorization rules, but you don't need to limit yourself to them. BTW, I recommend using the FCC's online equipment authorization system. Good luck, Paul Hare -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Pierre SELVA Sent: Monday, July 01, 2002 3:48 PM To: Forum Safety-emc Subject: FCC Authorization (Form 731) for ITE class B ; Do I need a TCB ? Importance: High Hello from France, I will have to submit a product to FCC in order to obtain a FCCID (product is an ITE, class B). After doing the test in an european listed laboratory (filed at FCC) and obtaining the Grantee Code, do I need to submit the package (result, doc, description, ...) to a TCB, or can I use the Electronic Filling System of FCC directly, as I did it some years ago ? I a TCB is needed, TCB members can contact me offline for business matters. Thanks for your collaboration, Pierre Selva eLABs e-mail : [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
