Try Rubbermaid 5M715 (beige) or 5M716 (gray). Good for 400 lbs. 30 inches(0.76 meter) high.
John Shinn, P.E. Manager, Lab Operations, Sanmina-SCI -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Gary McInturff Sent: Monday, July 01, 2002 10:06 AM To: EMC-PSTC (E-mail) Subject: Non-metallic tables. I am looking for a non-metallic table I can put equipment on for pre-pre-compliance checks. Was thinking of Rubbermaid Corp or the likes, but first blush says they don't have anything sufficiently close. Anybody our there buy rather than make the chamber test tables? Gary ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
<<attachment: winmail.dat>>
