Hi Dave:
> Does this apply to in-house test equipment? That is, equipment that is
built
> in-house and remains on site? In the past I have designed in-house
equipment
> to meet the safety standards but did not send the equipment out for testing
> and certification.
Yes.
If you check with your local electrical code inspectors
(or, if you have one, your in-house electrician ), you
will find that custom-built equipment used in your
factory or site must meet the electrical code, which
means it must be certified for safety.
Many of the certification houses offer on-site
investigations of such equipment. UL has a standard
(I don't recall the number) for such equipment. Upon
successful completion of the investigation, the cert
house will put a sticker on the equipment, and the
electrical code inspector will accept the equipment.
(Such certification also protects your employer against
violation of OSHA rules.)
Best regards,
Rich
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
majord...@ieee.org
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: emc-p...@hypercom.com
Dave Heald: davehe...@attbi.com
For policy questions, send mail to:
Richard Nute: ri...@ieee.org
Jim Bacher: j.bac...@ieee.org
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"