Check out Alodyne. It's a machine shop process like anodize but conductive.
Fred Townsend Scott Lacey wrote: > To the group, > > Does anyone know of any conductive coating, preferably spray-on, > that could be used on mating aluminum chassis surfaces? We > manufacture (in very low volume) test equipment that is housed in a > commercially manufactured anodized aluminum enclosure. Our > machine shop mills the anodizing from mating surfaces and adds > additional screw holes to improve bonding. The concern is that the > surfaces will not remain conductive over time. > > Conventional dip alodyne is out of the question. The process would > mar the black anodized finish on the exposed portions. We are > considering using a wipe-on alodyne that Dupont sells to the > autobody trade but have concerns as to its suitability for this > application. > > The ideal would be a spray-on conductive coating that we could > apply to the exposed aluminum after masking the anodized parts. > We would abrade the surfaces with fine Scotch Brite just pryor to > painting. Does anyone know of such a product? > > Scott Lacey > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
