Alex, we used a standard camera with a good zoom with remote control, mounted it to the ceiling in the upper corner of the room behind the antenna with the wires running out a small hole and covered it in a screened enclosure. Before we did that we verified that the enclosure did not perturb the calibrated field. It works great up to 10V/m.
Richard Woods Sensormatic Electronics Tyco International From: Alex McNeil [mailto:alex.mcn...@ingenicofortronic.com] Sent: Wednesday, March 26, 2003 6:34 AM To: emc-p...@majordomo.ieee.org Subject: EN61000-4-3 Radiated Immnuity Product Monitoring Hi Forum, I have a EN61000-4-3 compliance test set up in a Chamber. Some of our products have LCD displays 2cm X 8cm. My problem is I bought a Teseo RF proofed camera that cannot zoom in on the display at a distance of 2m (from the corner of the chamber). I can obviously see the display if I place the camera next to the product. However, it seems that the camera must be positioned outwith the 1.5Msq calibrated field area? I heard that there are fibre optic probes that can be positioned at the display and fed back into the camera lense via an adaptor? Has anyone heard of this method? Has anyone any idea of overcoming my problem without the need to purchase a >£5K camera? How near am I allowed to place the camera? Thanks in advance for your kind comments. Kind Regards Alex McNeil Principal Engineer Tel: +44 (0)131 479 8375 Fax: +44 (0)131 479 8321 email: alex.mcn...@ingenicofortronic.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc