In a message dated 3/25/2003 4:31:09 PM Central Standard Time, [email protected] writes:
Derrick, I'm sure you used the antenna factors correctly but I'll put in my 2 cents worth anyway. Were the AF's used correctly? You need the TX AF and the RX AF. If the receive antenna factor was used as the transmit antenna factor that will skew the calibration. Dave Cuthbert Hi Dave, Yep, they check out. Without advertising too much, I'm using Schaffner's Compliance 3, with the Blue Schaffner Bi-log. I use a HP 8447 also... I only have Rx factors ( at 3 metres ) for this antenna. I use a different antenna for my immunity work. I disconnected the antenna, and fed a signal directly from a signal source at that point. I'm happy I did that right. Cheers, Derek.
