Clause 6.1 of EN 61000-3-3 + A1 says "Tests shall not be made on equipment which is unlikely to produce significant voltage fluctuations or flicker. It may be necessary to determine, by examination of the circuit diagram and specifications of the equipment and by a short functional test, whether significant voltage fluctuations are likely to be produced."
Am I standing on firm ground assuming that equipment consuming less than 75W can be exempted from test? Richard Woods Sensormatic Electronics Tyco International This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
