Hello Richard, Have you taken a look at 21 CFR 1040? The FDA/CDRH has certain compliance requirements for laser systems and laser products.
Best regards, Ron Wellman At 03:16 PM 3/3/2003 -0500, [email protected] wrote: >Are any national restrictions on the use of a Class 2 laser in areas where >the general public would be exposed? A good example would be a beam across a >doorway to detect entry and exit. Assume the product is fully compliant with >IEC 60825-1. > >Richard Woods >Sensormatic Electronics >Tyco International > > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > >To cancel your subscription, send mail to: > [email protected] >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > >For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > >Archive is being moved, we will announce when it is back on-line. >All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
