Doug,
I agree with the D of C, but where does it state that the technical
file must also be held by the representative in the EU? Maybe I missed that
one. I am speaking with regards to the EMCD and LVD. It's not a big deal
if it is required, although it would be easier to keep the files in a
central location and minimize copying.
Thx,
Joe
*************************************
Joe Finlayson
Manager, Compliance Engineering
Telica, Inc.
734 Forest Street, Bldg. G, Suite 100
Marlboro, MA 01752
Tel: (508) 804-8212
Fax: (508) 480-0922
Email: [email protected]
From: [email protected] [mailto:[email protected]]
Sent: Tuesday, April 29, 2003 11:19 AM
To: [email protected]
Cc: [email protected]
Subject: Re: D of C again
And the answer is........................
The D of C must be signed by the responsible person designated by the
manufacturer. The signatory does not have to be located in the EU.
The manufacturer must designate a representative in the EU who will hold
the certificate and the technical file. This could be an agent,
distributor.
A copy of the D of C that states the directives complied with must be
placed in the user manual. Note, this does not have to be signed, but it
must state where the signed original can be obtained. i.e. the EU
representative's contact details.
Doug Beckwith
(OOPO)
[email protected]
Sent by: To:
[email protected]
owner-emc-pstc@majordom cc:
o.ieee.org Subject: D of C again
04/29/03 09:13 AM
Please respond to
Lfresearch
Hi folks,
I've been asked by a US manufacturer who's signature if any should appear
on the D of C, and should they be located on European soil.
Is there a clear consensus?
Thanks,
Derek N. Walton
Owner L F Research EMC Design and Test Facility
Poplar Grove,
Illinois, USA
www.lfresearch.com
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
