All,
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Sorry.... I forgot to include that my current tests using the GTEM is under software control by a company called TILE. So collecting the data ( Radiated Emission for Class A FCC ) at my end is not a problem. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ I am working with a GTEM Cell and wish to perform self verification of our Class A products. We have going to an outside testing house for FCC verification and wish now to do our own verification. ********************************************************************* WHAT I AM LOOKING FOR IS THE.... Step by Step procedure for calculating and performing Data Correlation between a GTEM Cell and OATS ! ************************************************************** In researching what has to be done to accomplish this task, I have gathered the following information... 1)I Do NOT have to submit the correlated data to the FCC 2) The test does require that we do three ( 3 ) "separate" setups and break down when we start to collect data. 3) The correlation between a GTEM and an OATS must be performed with a device of the type for which you wish to qualify the GTEM. The OATS must comply with the requirements of ANSI C63.4 and the correlation measurements must be performed per C63.4. The same measuring instruments should ( but is not necessary )be used at both test locations. If anyone has "done the math" and the setups for such testing , would you pls contact me or point me in the direction where I could possibly "educate" myself. Regards, Reg Henry This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
