I read in !emc-pstc that Chris Chileshe <[email protected]> wrote (in <[email protected]>) about 'Medical grade PSU and Grounding techniques' on Mon, 7 Apr 2003:
>I have been looking at commercially available medical grade PSU's >and I find the 5-way DIN connector extensively used. Is this the >preferred connector? If so which standard should I be looking at to >design the mating part? If not, is there a section of the standard >which recommends connector types? I don't know for sure which 'DIN' connector you mean, but maybe IEC 60130-9 is relevant. -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
