The 300 386 is somehow a generic standard which is not harmonized within the EU and therefor if you use it you have to take a notified body on board. But in case of the GSM/GPRS modem the 301 489-7 is applicable and this one is harmonized. So the opinion os a notified body is not mandatory.
Regards, Oliver > -----Original Message----- > From: Stone, Richard A (Richard) [SMTP:[email protected]] > Sent: Thursday, May 08, 2003 2:37 PM > To: 'Kneip, Oliver' > Subject: RE: Harmonized Standard > > what about 300386-2: 97 and now 300386:2001? > for Telecommnuciations...should be included I thought. > thnak you, > Richard, > > -----Original Message----- > From: Kneip, Oliver [mailto:[email protected]] > Sent: Thursday, May 08, 2003 5:28 AM > To: 'Kirk Thomas'; [email protected] > Subject: RE: Harmonized Standard > > > > The four essential requirements according to the R&TTE Directive are: > > RF: EN 301 511 > EMC: EN 301 489-7 > Health: EN 50360 > Safety: EN 60950 > > You may be able to show compliance with the 301 511 if your modem is > already > tested according to the GCF stanadard TS51.010 or the apropriate PTCRB > standard. > > Best regards / Mit freundlichen Grüßen > Oliver Kneip > International Type Approval > > CETECOM ICT Services GmbH > Partner for Market Access and Global Success > Untertuerkheimer Str. 6-10 - 66117 Saarbruecken - Germany > Tel.: +49 (0) 681 5 98 87 25 > Fax: +49 (0) 681 5 98 87 75 > E-Mail: [email protected] > > Visit us in the Internet > http://www.cetecom-ict.de > > > > -----Original Message----- > > From: Kirk Thomas [SMTP:[email protected]] > > Sent: Tuesday, May 06, 2003 12:37 AM > > To: [email protected] > > Subject: Harmonized Standard > > > > > > > > I have a GSM/GPRS modem that has been certified under part 24E, and now > I > > am > > looking for a harmonized standard to test against for Europe. Any > > suggestions. > > > > Thanks for your assistance, > > > > Kirk Thomas > > > > > > ------------------------------------------- > > This message is from the IEEE EMC Society Product Safety > > Technical Committee emc-pstc discussion list. > > > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > > > To cancel your subscription, send mail to: > > [email protected] > > with the single line: > > unsubscribe emc-pstc > > > > For help, send mail to the list administrators: > > Ron Pickard: [email protected] > > Dave Heald: [email protected] > > > > For policy questions, send mail to: > > Richard Nute: [email protected] > > Jim Bacher: [email protected] > > > > Archive is being moved, we will announce when it is back on-line. > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: [email protected] > Dave Heald: [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
