Hi David, Since your product is SELV it does not need to meet the LVD BUT you have still to consider the General Safety Product Directive (catch all Safety Directive) and also the Product Liability Directive. I would always recommend you have your ITE products tested for Safety to EN60950.
Note: If the ITE product has an analogue modem then it requires to meet the LVD via the harmonised standard EN60950 Kind Regards ALEX From: David Gelfand [mailto:[email protected]] Sent: Friday, June 27, 2003 3:20 PM To: EMC List Subject: CE without LVD? Hello Group, A ITE product (not ours!) is powered by an CE marked external ac-dc power supply and has only SELV ports. I believe this product must be tested to EN 60950, and that in the CE Declaration of Conformity it must declare conformity to the LVD via EN 60590. It is being suggested that this product does not need safety testing and does not need to include the reference to EN 60950 and the LVD in the CE DoC, since it is SELV circuits only. Can you provide me with references to back my point of view? Thanks, David. David Gelfand Approvals/Design Engineer Memotec Inc. This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
