I read in !emc-pstc that [email protected] wrote (in <E6F64B42266D6 [email protected]>) about 'CE without LVD?' on Fri, 27 Jun 2003: >Yes I once had a device that was SELV and this caused some confusion. We >designed it to meet EN61010 as it was a piece of lab equipment. It was powered >by a 5 volt, 40 amp power supply. We designed/tested for single component >faults, temperature, etc. In the end, a large safety testing company informed us >that no testing was required at all since it was SELV. I still do not agree with >their assessment.
200 W input under normal operating conditions! You could have arranged to have one burn up in their CEO's office to prove your point! -- Regards, John Woodgate, OOO - Own Opinions Only. http://www.jmwa.demon.co.uk Interested in professional sound reinforcement and distribution? Then go to http://www.isce.org.uk PLEASE do NOT copy news posts to me by E-MAIL! This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
