Hi Group, If a distributor and/or customer states that they are willing to take the responsibility of placing pre-CE Mark products in a real application so that they can carry out a field trial:
1. In this scenario, who is ultimately responsible for placing the non CE Mark products in the field i.e. the Manufacturer or the Distributor/customer? 2. Is there any way a manufacturer, along with the co-operation of the distributor/customer, can do a "real application" field trial prior to CE Mark testing? 3. Is this scenario covered in the Directives? Thanks in advance for you coments and I apologise if this has been covered before. Kind Regards Alex McNeil Principal Engineer Tel: +44 (0)131 479 8375 Fax: +44 (0)131 479 8321 This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
