When the model says something does not work, I believe it. When the model
says something works, I take it with the several grains of salt.
Don Borowski
Schweitzer Engineering Labs
Pullman, Washington
USA
Dave Cuthbert wrote on 06/19/2003 02:45:40 PM:
>
> Ran some more simulations. This is enough to tell me that the fence
> is not a good thing. The dipoles were changed to vertical
> polarization, both centers at a height of 1 meter. At 300 MHz there
> is a 0.4 dB difference with and without the fence.
>
> Then the frequency was changed swept around. A bad spot was found at
> 55 MHz. The difference with and without the fence is 2.6 dB.
>
> Things would model somewhat differently with a better chain link
> fence model. I can't say if things would be better or worse.
>
> Dave Cuthbert
> Micron Technology
>
>
> -------------------------------------------
> This message is from the IEEE EMC Society Product Safety
> Technical Committee emc-pstc discussion list.
>
> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
>
> To cancel your subscription, send mail to:
> [email protected]
> with the single line:
> unsubscribe emc-pstc
>
> For help, send mail to the list administrators:
> Ron Pickard: [email protected]
> Dave Heald: [email protected]
>
> For policy questions, send mail to:
> Richard Nute: [email protected]
> Jim Bacher: [email protected]
>
> Archive is being moved, we will announce when it is back on-line.
> All emc-pstc postings are archived and searchable on the web at:
> http://www.ieeecommunities.org/emc-pstc
>
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
